|
|
|
Determining Tablecloth Sizes
Round Tables
First, you need to choose the amount of drop you'd like to have. The standard
round banquet table is 30" high, so to drop halfway to the floor you need 15". (see
illustration below, left) If you want to cover a 60 inch round table and
have the standard 15" drop, you will need 60" to cover the table-top, then an
additional 15" on either side of the table: top = 60", drop from edge of table =
15" (X 2 - two edges.) So you will need a 90" round tablecloth to cover your 60"
round table and still have 15" of drop.
Now, if you want the tablecloth to drop all the way to the floor, you will need
30" drop instead of 15". Formula: top = 60", drop from edge of table = 30" (X 2
- two edges), for a total length of 120 inches. |
| |
|
Standard Lap Length sizes:
* 48" round table needs 70" cloth
* 60" round table needs 90" cloth
For an old style "square-on- round" look,
use a 120" (floor length) round tablecloth with an 85" square tablecloth on a 60" round
table.
* 72" round table needs 120" cloth.
|
 |
|
|
Square and Rectangular Tables
The standard banquet table is 30" high, so to drop halfway to the floor you
need 15". (see illustration below, left) So, if you want to cover a
55 inch square table and have the standard 15" drop, you will need 55" to
cover the table-top, then an additional 15" on either side of the table: top
= 55", drop from edge of table = 15" (X 2 - two edges.) You will need an 85"
square tablecloth to cover your 55" table and still have 15" of drop.
Rectangular Tables must take into account both the length and the width. |
 |
|
|
 |
Use this formula for any size table: add to the
diameter of the table 30" for a standard drop. For a drop that goes all
the way to the floor add 60"to the diameter of the table top |
|
|
 |
On a standard 8' rectangle table you will need a 90" x 156" for a drape
that goes all the way to the floor. Or a fitted tablecloth made
specially for a 8' rectangle table. For a
60" Round table you need a 120" cloth to drape to the floor. |
|
|